The automatic welding equipment used in producing coil nails is a unique type of machine. It utilizes two copper coated wires to weld nails at an angle of 15° to 16°. Once welded, the nails are then coiled to a predetermined length, at which point they are cut off to form a coil with a flat or cone-shaped top. This machine can handle a variety of raw materials, including normal wire, new metal wire, waste rebar, scrap steel bar, hard-drawn wire, waste electrodes, and other types of steel waste.
Siemens PLC & inverter control system enable high-speed and stable operation of pulley type wire drawing machines, making them suitable for both high and low carbon steel wire. The low carbon steel wire produced can be used in various applications, including mesh nets, steel fibers, nails, staples, construction, agriculture, and furniture. Meanwhile, other steel wire products, such as prestressing wire, PC wire, springs, steel rope wire, steel cord, and bead wire for tires, can also be produced using this machine.
The principle of this machine is putting the disorder nails in the vibrating disk. Then the vibrating disk will put the nails in order and through the feeding mouth to the welding part, then it will automatically oiled rust, drying, counting and coiling in a roll.
The principle of this machine is to put messy nails into the vibrating plate. Then the vibrating plate arranges the nails neatly, and reaches the welding part through the feeding port, and is automatically oiled, dried, counted and rolled into rolls.
This machine is used to make several staples,like small staples for office,carton staples for industrial use.This machine has changed the traditional heavy blowing method, adopts hydraulic system actuators, PLC control, has the characteristics of safe operation, stable performance, low noise and high efficiency. So far, the series of nailing machines have been welcomed by the majority of customers.
This machine is suitable for producing U staple such as N staple, K staple, carton staple, etc.
Heavy punching method is abandoned in this machine, and it adopts a hydraulic system for implementation of components, PLC controlled, with characteristics of safety operation, stable performance, low noise and high efficiency.
This machine is suitable for producing various staples such as office staples, 80/90 series, carton staples, etc.It adopts a hydraulic system for implementation of components which controlled by PLC .It also has safety operation, stable performance, low noise and high efficiency compared with the common machines.
Pulley type wire drawing machine are suitable for the high & low carbon steel wire, with Siemens PLC & inverter control system to assure high speed & stable operation. Low Carbon steel wire product used in mesh net, steel fiber, nail & staple making, construction, agriculture & furniture field, etc. And other steel wire product used in prestressing wire, PC wire, spring, steel rope wire, steel cord & Bead wire for tyre, etc.
1.Shorter stroke (12mm), traditional machine around 100mm;2.The nail length can be well controlled;3.Metal scraps can be separated with nails very well;4.High quality nails: consistent nail head and shank length (tolerance 0.5mm), defective rate 1/100000, which is very good for coil nail collating and strip nail making;5. Easy operation and high efficient: the machine is fully automatic and runs stably;6. Low use-cost and tooling cost;7. Automatic oiling system with oil pump;8. With seven alarming sensors to protect the machine and ensure the nail quality;9. Low maintenance cost;10.Save energy and labor cost.
In recent years, more and more nail-making factories have chosen to replace traditional nail-making machines with ultrafast nail-making machines.
A high-speed nailing machine can be equivalent to the output of 8-10 ordinary nailing machines. Through the use of a single molding procedure, with the aid of the mold, the nails made by high-speed machines have excellent quality and superior shape.
Our high-speed nail making machine stands out in different markets because of its excellence. It differs from old-fashioned methods as it can produce perfect, high-quality nails regularly, while reducing the percentage of mistakes. Our machine also prevents nails from sticking to steel wire during the sorting process, effectively raising efficiency. Utilizing our machine enables you to maximize productivity, decrease energy and equipment expenditures, minimize waste, and cut costs related to nail cutters, molds, and related equipment.
Our fast thread rolling machine is equipped with a plethora of molds that can generate a diverse assortment of unique nail shapes, such as anti-loose screw shank nails, ring shank nails, and other latest nail creations. The machine encompasses two thread rolling dies placed in a staggered tooth shape, in a relative 1/2 pitch. One die remains stationary while the other moves back and forth parallelly. When the nail is fed through the two dies, it is subjected to pressure and friction, ultimately resulting in a threaded surface.
The automatic welding equipment used in producing coil nails is a unique type of machine. It utilizes two copper coated wires to weld nails at an angle of 15° to 16°. Once welded, the nails are then coiled to a predetermined length, at which point they are cut off to form a coil with a flat or cone-shaped top. This machine can handle a variety of raw materials, including normal wire, new metal wire, waste rebar, scrap steel bar, hard-drawn wire, waste electrodes, and other types of steel waste.
Siemens PLC & inverter control system enable high-speed and stable operation of pulley type wire drawing machines, making them suitable for both high and low carbon steel wire. The low carbon steel wire produced can be used in various applications, including mesh nets, steel fibers, nails, staples, construction, agriculture, and furniture. Meanwhile, other steel wire products, such as prestressing wire, PC wire, springs, steel rope wire, steel cord, and bead wire for tires, can also be produced using this machine.
The principle of this machine is putting the disorder nails in the vibrating disk. Then the vibrating disk will put the nails in order and through the feeding mouth to the welding part, then it will automatically oiled rust, drying, counting and coiling in a roll.
The principle of this machine is to put messy nails into the vibrating plate. Then the vibrating plate arranges the nails neatly, and reaches the welding part through the feeding port, and is automatically oiled, dried, counted and rolled into rolls.
This machine is used to make several staples,like small staples for office,carton staples for industrial use.This machine has changed the traditional heavy blowing method, adopts hydraulic system actuators, PLC control, has the characteristics of safe operation, stable performance, low noise and high efficiency. So far, the series of nailing machines have been welcomed by the majority of customers.
This machine is suitable for producing U staple such as N staple, K staple, carton staple, etc.
Heavy punching method is abandoned in this machine, and it adopts a hydraulic system for implementation of components, PLC controlled, with characteristics of safety operation, stable performance, low noise and high efficiency.
This machine is suitable for producing various staples such as office staples, 80/90 series, carton staples, etc.It adopts a hydraulic system for implementation of components which controlled by PLC .It also has safety operation, stable performance, low noise and high efficiency compared with the common machines.
Pulley type wire drawing machine are suitable for the high & low carbon steel wire, with Siemens PLC & inverter control system to assure high speed & stable operation. Low Carbon steel wire product used in mesh net, steel fiber, nail & staple making, construction, agriculture & furniture field, etc. And other steel wire product used in prestressing wire, PC wire, spring, steel rope wire, steel cord & Bead wire for tyre, etc.
1.Shorter stroke (12mm), traditional machine around 100mm;2.The nail length can be well controlled;3.Metal scraps can be separated with nails very well;4.High quality nails: consistent nail head and shank length (tolerance 0.5mm), defective rate 1/100000, which is very good for coil nail collating and strip nail making;5. Easy operation and high efficient: the machine is fully automatic and runs stably;6. Low use-cost and tooling cost;7. Automatic oiling system with oil pump;8. With seven alarming sensors to protect the machine and ensure the nail quality;9. Low maintenance cost;10.Save energy and labor cost.
In recent years, more and more nail-making factories have chosen to replace traditional nail-making machines with ultrafast nail-making machines.
A high-speed nailing machine can be equivalent to the output of 8-10 ordinary nailing machines. Through the use of a single molding procedure, with the aid of the mold, the nails made by high-speed machines have excellent quality and superior shape.
Our high-speed nail making machine stands out in different markets because of its excellence. It differs from old-fashioned methods as it can produce perfect, high-quality nails regularly, while reducing the percentage of mistakes. Our machine also prevents nails from sticking to steel wire during the sorting process, effectively raising efficiency. Utilizing our machine enables you to maximize productivity, decrease energy and equipment expenditures, minimize waste, and cut costs related to nail cutters, molds, and related equipment.
Our fast thread rolling machine is equipped with a plethora of molds that can generate a diverse assortment of unique nail shapes, such as anti-loose screw shank nails, ring shank nails, and other latest nail creations. The machine encompasses two thread rolling dies placed in a staggered tooth shape, in a relative 1/2 pitch. One die remains stationary while the other moves back and forth parallelly. When the nail is fed through the two dies, it is subjected to pressure and friction, ultimately resulting in a threaded surface.